Eco-recovery
is a waste management service for your prints made with our eco-filaments (PLA+, rPETG).
efikeco is a company that advocates efficiency and ecology. We set ourselves the challenge of minimizing the environmental impact of this new technology that is 3D printing. With this service, we try to recover the 3D printing waste generated by our products and in this way, further reduce this environmental impact.

How does it work?
From your first purchase on our website, we start counting the number of reels you purchase. If you purchase our products through one of our resellers, we simply ask that you keep a copy of your invoices.
When purchasing your fifteenth reel or during a group purchase of ten reels, a pre-paid eco-recycled box will be sent to you at the same time as the order. You will only have to drop off the filled box, either at a postal office, at one of our participating retailers, or directly at our offices.
For deposits in our offices or any information about returning your eco-recycled box, use the “ send a box for recycling ” link below.

The eco-recovery box
eco-recup has a format of 12"x12"x16" (30cm x 30cm x 40cm). Considering an average loss of 20% of plastic per 1kg reel (support, tests, failed prints, end of reels etc.), it's as if you could send us back the equivalent in printing waste of using 20kg of eco-filaments.

Eco-recovery conditions
- Service offered only to buyers of efikeco eco-filament.
- Valid in Quebec and Ontario only (Canada).
- The purchase of the fifteen reels must be made within one year after the purchase of the first reel.
- Separate the PLA+ and rPETG in paper bags inside the box provided for this purpose if you have purchased several types of plastic.
- We do not recover plastic if it has been coated with varnish or paint.