eco-filament Cirkulero rPETG
eco-filament Cirkulero rPETG
eco-filament Cirkulero rPETG
Sold Out

eco-filament Cirkulero rPETG

efikeco
29.95$
Quantity

Our Cirkulero rPETG eco-filament, just like our normal rPETG eco-filament, is made here in Canada. It retains the same mechanical properties (see technical sheet) because we only recycle rPETG eco-filament from Efikeco.

This new product allows us to close the waste recovery loop emitted by our products. In fact, each spool of Cirkulero rPETG eco-filament contains 40% plastic from your eco-recycled boxes and production waste. You should also know that the recycled plastic contained in the Cirkulero rPETG eco-filament is only used once to make filament for 3D printing. Our laboratory tests have shown that this is the only way for us to ensure we offer you a quality product. This new product therefore completes the end of a life cycle for this plastic in the world of 3D printing. It will then go to our recycling bins.

However, we invite you to return the scraps and printing waste from your Cirkulero rPETG plastic to us, because the plastic in your print does not bear any visible recycling identification mark. We can then ensure that it is sent for recycling with PET 1 plastics.

This product is particularly attractive because of its price, which makes it possible to offer an ecological solution for your printing which requires quality rPETG eco-filament.

Given its manufacturing process, this product is offered in only one color, anthracite black which is the typical color of our Cirkulero rPETG eco-filaments.

Diameter tolerance : +/- 0.03 mm

Printing temperature : 220-240°c

Platen heating : 80-90°c

Printing speed : 30-70 mm/s

Our products are manufactured (including extrusion) entirely in Canada with an entrepreneurial eco system that respects eco-responsible values.

 

Plastic recycling is a solution, not an end in itself. Let's clean the oceans of these plastic particles that escape the recycling process. Each reel purchased contributes to this noble cause through donations.

Net weight = 1 kg
Box size: 21 cm x 23 cm x 8 cm

 

Net weight = 2 kg
Box size: 21 cm x 23 cm x 16 cm

Non-contact laser control
Continuously and accurately measures the filament tolerance. Stops production automatically when it is no longer respected. This is to offer you a constant diameter within tolerances and avoid clutter in your extrusion nozzle.


Continuous production
Our filament is extruded and wound at once in the coil provided for this purpose. This makes it possible to ensure the smooth running of the filament during printing and thus avoid knots.


Humidity control
From the storage of our granules before extrusion to the extrusion of the filament. The humidity of our plastic is systematically controlled. Our filament is then vacuumed with silica ready for use.


Control of the uniformity of our colors
We offer you consistency in the color of the filament produced. From one production to another we use the same Pantone codes and mix uniform colors with plastic. This avoids shades of the same color from one production to another.


Choice of materials
The rigorous choice of our additives and plastics allows us to offer you a superior quality product. Our filament will give you very accurate printing results that can be used on all the latest 3D printers.

Our products are manufactured (including extrusion) entirely in Canada with an entrepreneurial eco system that respects eco-responsible values.

 

Plastic recycling is a solution, not an end in itself. Let's clean the oceans of these plastic particles that escape the recycling process. Each reel purchased contributes to this noble cause through donations.

Net weight = 1 kg
Box size: 21 cm x 23 cm x 8 cm

 

Net weight = 2 kg
Box size: 21 cm x 23 cm x 16 cm

Non-contact laser control
Continuously and accurately measures the filament tolerance. Stops production automatically when it is no longer respected. This is to offer you a constant diameter within tolerances and avoid clutter in your extrusion nozzle.


Continuous production
Our filament is extruded and wound at once in the coil provided for this purpose. This makes it possible to ensure the smooth running of the filament during printing and thus avoid knots.


Humidity control
From the storage of our granules before extrusion to the extrusion of the filament. The humidity of our plastic is systematically controlled. Our filament is then vacuumed with silica ready for use.


Control of the uniformity of our colors
We offer you consistency in the color of the filament produced. From one production to another we use the same Pantone codes and mix uniform colors with plastic. This avoids shades of the same color from one production to another.


Choice of materials
The rigorous choice of our additives and plastics allows us to offer you a superior quality product. Our filament will give you very accurate printing results that can be used on all the latest 3D printers.